Pumps/Inflation

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.

Like bringing your floor pump on the trail. High-volume barrel fills fat tires fast while fold-out foot pad and flexible hose make inflation a snap. - Head: Presta/ Schrader/ Dunlop Valves - Barrel: Butted Aluminum - Thumb Lock: Plastic - Handle: T-Type Plastic/Kraton - Capacity: 160 psi / 11 bar - Added Features: Fold-out Foot Pad - Flexible Hose - Centerline Mount Bracket - Size (L x W x H): 35 x 5.8 x 3 cm - 13.8" x 2.3" x 1.2' - Weight: 250g / 8.80 oz

A precision fork and shock pump with an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates air loss when disconnecting, while the flexible hose takes stress off the valve stem when pumping. - Head: Pressure-Rite shock valve - Guage: 360 psi / 24.8 bar, Analog - Handle: Dual density polymer - Dimensions: 21.5 x 4.5 x 4.3 cm / 8.5" x 1.8 x 1.7" - Volume per stroke: 11cc - Barrel: Aluminum - Pressure Tuning: Air release button - Features: Flexible rotating hose - Weight: 170 g / 5.98 oz

It's the Topeak PocketShock DXG’s big brother, the PocketShock DXG XL! This precision fork and shock pump features an extended barrel and offers quick inflation and an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. The flexible hose takes stress off the valve stem when pumping, protecting your expensive fork and shock fittings. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates the common problem of air loss when disconnecting.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Topeak's Road Morph G is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Road Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose with built-in gauge and a T-handle. Of course, it fits Presta and Schrader valves and a frame mount is included, too.

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.

Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.

• Up to 120psi • Gauge • Lightweight

These compact, threaded 16-gram cartridges work with compatible CO2 inflators and easily packs into your seat bag.

Features: - First of its kind digital mini pump for tires and MTB shocks - Telescoping handle effortlessly switches between high pressure & high volume - Presta & Schrader valve compatibility - Digital gauge reads from 5 PSI to 300 PSI with +/- 1% accuracy - Micro adjust button allows for fine tuning of air pressure - Foldable hose allows for easy usage and storage Specs - Capacity: 300 Psi - Length: Open: 23-3/4" Closed: 11-3/4” - Weight: 282 Grams

The best of both worlds are now combined into one. Three tire levers and a CO2 inflator head round out this combo tool. Features: - 1 Tire Lever With Built In CO2 Inflater - 2 Tire Levers With Built In Spoke Hooks - Presta & Scharder Valve Compatible Specs: - Number of Tools: 2 - Weight: 38 Grams - CO2 Lever Length: 5 1/4? - Lever Length: 4 1/2?

Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).

Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.

Prestacycle introduces the new Prestaflator Mini. A new tool for Bicycle tire inflation designed for quick and easy one-handed inflation of bicycle tires.

Renew all the seals in your Prestaflator tool. These o-rings fit the hose, Pressure Release button and Trigger Plunger on a Prestaflator tool. Kit also includes internal trigger-plunger washers for 2010 and newer Prestaflator tools. O-rings made from high quality buna-nitrile (BN70) rubber with a durometer rating of 70. Updated 2013 Plunger seal is more reliable and gives the tool easier trigger regulation and retro-fits to 2010 and newer tools. Presta Head washers and rebuild kits are now sold separately.

Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

Planet Bike's line of CO2 replacement cartridges makes tire repairs quick and easy. - Planet Bike's CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators. - Planet Bike cartridges are tested to the highest standards for durability, safety, and reliability. They contain pure CO2 with no oils or contaminants. - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Angled Presta valve adapter - Designed for disc wheel use

Grip and rip with Lezyne's Shock Drive portable shock pump. With a full CNC-machined aluminum body, tough composite gauge, and palm-sized ergonomic handle, you can pump reps with Schwarzenegger pep till your shock's content. The zero-loss chuck ensures accurate ride pressures up to 400 psi, and its light weight and durability make it great for trail or shop use.

Lezyne's easy-to-use Trigger Speed Drive CO2 is super compact and portable. Its simple triggered operation lets you control exactly how much CO2 you're putting into your tires. Plus, it's press-on Presta compatible head is super fast to use and works with all threaded cartridges.

- Easy-to-read 2.5" gauge - Steel barrel and base - Ergonomic sweeping handle with ball inflation accessory storage - AutoHead™ with metal accents and pressure release button - 160psi rating

- Easy-to-read 2.5" raised gauge - Durable steel barrel and base - Ergonomic handle with ball inflation accessory storage - AutoHead™ with anodized alloy accents and pressure release button - 160psi rating

- Easy-to-read 3.0" gauge - AutoHead™ with ball inflator accessories - Aluminum barrel and plastic base - 160psi rating