Pumps/Inflation

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Like bringing your floor pump on the trail. High-volume barrel fills fat tires fast while fold-out foot pad and flexible hose make inflation a snap. - Head: Presta/ Schrader/ Dunlop Valves - Barrel: Butted Aluminum - Thumb Lock: Plastic - Handle: T-Type Plastic/Kraton - Capacity: 160 psi / 11 bar - Added Features: Fold-out Foot Pad - Flexible Hose - Centerline Mount Bracket - Size (L x W x H): 35 x 5.8 x 3 cm - 13.8" x 2.3" x 1.2' - Weight: 250g / 8.80 oz

A precision fork and shock pump with an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates air loss when disconnecting, while the flexible hose takes stress off the valve stem when pumping. - Head: Pressure-Rite shock valve - Guage: 360 psi / 24.8 bar, Analog - Handle: Dual density polymer - Dimensions: 21.5 x 4.5 x 4.3 cm / 8.5" x 1.8 x 1.7" - Volume per stroke: 11cc - Barrel: Aluminum - Pressure Tuning: Air release button - Features: Flexible rotating hose - Weight: 170 g / 5.98 oz

It's the Topeak PocketShock DXG’s big brother, the PocketShock DXG XL! This precision fork and shock pump features an extended barrel and offers quick inflation and an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. The flexible hose takes stress off the valve stem when pumping, protecting your expensive fork and shock fittings. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates the common problem of air loss when disconnecting.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Topeak's Road Morph G is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Road Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose with built-in gauge and a T-handle. Of course, it fits Presta and Schrader valves and a frame mount is included, too.

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.

- Ball-inflating needle for footballs, basketballs and more

These compact, threaded 16-gram cartridges work with compatible CO2 inflators and easily packs into your seat bag.

High Quality, Compact, and Easy-to-Use CO² Threaded Cartridges. - High Capacity 25 Gram Threaded Cartridges - Fits All CO² Pumps That Accept 16G Threaded - Small, Compact, Easy To Use - 1 Box / 20 Cartridge Count

Features: - First of its kind digital mini pump for tires and MTB shocks - Telescoping handle effortlessly switches between high pressure & high volume - Presta & Schrader valve compatibility - Digital gauge reads from 5 PSI to 300 PSI with +/- 1% accuracy - Micro adjust button allows for fine tuning of air pressure - Foldable hose allows for easy usage and storage Specs - Capacity: 300 Psi - Length: Open: 23-3/4" Closed: 11-3/4” - Weight: 282 Grams

The best of both worlds are now combined into one. Three tire levers and a CO2 inflator head round out this combo tool. Features: - 1 Tire Lever With Built In CO2 Inflater - 2 Tire Levers With Built In Spoke Hooks - Presta & Scharder Valve Compatible Specs: - Number of Tools: 2 - Weight: 38 Grams - CO2 Lever Length: 5 1/4? - Lever Length: 4 1/2?

Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).

Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.

The Prestaflator ECO is designed with a medium flow trigger valve providing a perfect balance for inflation and seating tubeless tires. The dial pressure gauge lets you follow your progress visually. Designed for Bicycle Mountain & Road tires with a wide range of pressure requirements. Auto-Select Head Presta / Schrader auto-select head engages with a simple flip of the lever. Quick lever release minimizes air loss at disconnect. Quality Prestaflator is engineered specifically for the needs of bicycles and bicyclists. Only top quality materials are used for it’s components. We start with a cast Alloy body and give it a Nickel plated finish. The hose is made of reinforced PVC. It’s more flexible than rubber hoses and is rated for 300 PSI of continuous use. Smooth alloy clamps on the hose are more comfortable for use. The pressure gauge has a durable steel case covered with a rubber shock housing and offers accuracy with +/- 2%. The dial has a bicycle-specific pressure range of 12 Bar/174 PSI. It’s high enough to inflate any daily-use tire, but not excessive so the gauge is easy to read. Prestaflator – The Original Beware of fakes and cheap imitations sold by one-product sellers. These are not real brands that can stand behind your product. Prestacycle is the originator of the Prestaflator. We are a full-line Bicycle tools company providing the Cycling industry globally with world-class tool designs. Our R&D has created a proven design that we have consistently improved-upon through years of experience. Prestaflator is different… a high quality, serviceable tool… designed, built and warranted for use on Bicycles. Specifications: - 2" / Steel body dial pressure gauge. - 150 PSI (in 2 PSI increments). - 10.5 Bar (in 0.2 Bar increments). - Copper coil mechanism provides good accuracy. - Polymer Presta / Schrader auto-select head. - Engages any valve with a simple flip of the lever. - Presta AND Schrader - Quick lever release minimizes loss at disconnect. - Replaceable I/M compressor quick-release attachment. - Rubber pressure gauge housing for shock protection. - Cast alloy pistol grip handle with Nickel-plated finish. - Thumb-control pressure release button. - High-pressure hose for easy access on any wheel. Disclaimers Air compressor and air hose with quick release connector required for use – not included. Maximum air pressure is limited by your compressor’s capabilities.

Prestacycle introduces the new Prestaflator Mini. A new tool for Bicycle tire inflation designed for quick and easy one-handed inflation of bicycle tires.

Renew all the seals in your Prestaflator tool. These o-rings fit the hose, Pressure Release button and Trigger Plunger on a Prestaflator tool. Kit also includes internal trigger-plunger washers for 2010 and newer Prestaflator tools. O-rings made from high quality buna-nitrile (BN70) rubber with a durometer rating of 70. Updated 2013 Plunger seal is more reliable and gives the tool easier trigger regulation and retro-fits to 2010 and newer tools. Presta Head washers and rebuild kits are now sold separately.

Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Angled Presta valve adapter - Designed for disc wheel use

Replacement rubber hose and ABS Flip Thread Chuck for all high-pressure floor pumps and Micro Floor Drive (HV/HVG & HP/HPG) hand pumps. Includes all necessary aluminum connectors.

Giant's Control Blast 1 CO2 Inflation Kit consists of an inflator head that fits Presta valves, a cartridge sleeve, and a 16-gram CO2 threaded cartridge. It also accepts 12-, 16-, 20- and 25-gram threaded CO2 cartridges. The head features controllable air release so you can fine-tune your pressure.

- Easy-to-read 2.5" gauge - Steel barrel and base - Ergonomic sweeping handle with ball inflation accessory storage - AutoHead™ with metal accents and pressure release button - 160psi rating

- Easy-to-read 2.5" raised gauge - Durable steel barrel and base - Ergonomic handle with ball inflation accessory storage - AutoHead™ with anodized alloy accents and pressure release button - 160psi rating

- Easy-to-read 3.0" gauge - AutoHead™ with ball inflator accessories - Aluminum barrel and plastic base - 160psi rating

The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology. - Easy and controllable inflation - Push-to-inflate technology - Auto detect head for instant Presta or Schrader valve attachment - Lightweight, compact design - Weight: 26 grams Includes: (1) HammerHead inflator (1) threaded 20 gram CO2 cartridge